Free Huawei H12-893_V1.0 Exam Dumps May 2026

OSPF (Open Shortest Path First) is a routing protocol used in the underlay network of Huawei's CloudFabric DCNs. Let's evaluate each statement:

A . Typically, the IP address of Loopback0 is configured as the VTEP IP address and the same IP address is planned for active-active leaf nodes in the same group: This is true. Loopback0 IP is commonly used as the VTEP IP for stability, and in active-active leaf node groups (e.g., M-LAG), the same IP can be configured with VRRP or anycast to ensure consistency. TRUE.

B . The network type of spine and leaf nodes can be set to P2P in order to accelerate convergence: This is true. Setting OSPF network type to Point-to-Point (P2P) on spine-leaf links reduces overhead (e.g., no DR/BDR election) and speeds up convergence, a recommended practice in Huawei DCNs. TRUE.

C . This routing design is recommended when the DC has more than 300 switches: This is false. OSPF is suitable for smaller to medium-sized DCNs (e.g., up to 200-300 switches). For larger networks (>300 switches), EBGP is preferred due to better scalability and reduced complexity. FALSE.

D . It is recommended that all devices be planned in Area 0: This is false. While a single Area 0 is possible for small DCNs, multi-area OSPF is recommended for larger networks to manage scalability and reduce routing table size, avoiding a flat Area 0 design. FALSE.

Thus, A and B are true statements about OSPF routing design in a DC underlay.

In Huawei's CloudFabric Solution, SecoManager (Security Manager) and iMaster NCE-Fabric (Network Controller) are components of the SDN ecosystem. SecoManager handles security policy management, while iMaster NCE-Fabric manages network orchestration.

Deployment: These components can be deployed independently but are designed to integrate seamlessly. Huawei's architecture supports automated interconnection after installation, leveraging northbound/southbound APIs or pre-configured integration workflows.

Interconnection: Manual interconnection is not required post-installation; the system automates the process once both are deployed and configured within the same management domain (e.g., via IP addressing and authentication).

The statement is FALSE (B) because interconnection is automated, not manual.

On Huawei CloudEngine (CE) series switches, VXLAN tunnel monitoring and troubleshooting involve specific commands to diagnose issues such as tunnel Down status or failed dynamic establishment. Let's evaluate each option:

A . Run the display vxlan statistics command to check the cause of the fault: This command provides statistics on VXLAN tunnel traffic, including packet drops, encapsulation/decapsulation counts, and errors. It helps identify issues like misconfiguration or network congestion, making it a valid troubleshooting tool. TRUE.

B . Run the display vxlan peer command to check the cause of the fault on the peer device of the tunnel: This command displays information about VXLAN peers, including their IP addresses, VNIs, and reachability status. Checking the peer device's status can reveal connectivity or configuration mismatches, aiding fault diagnosis. TRUE.

C . Run the display vxlan troubleshooting command to check the causes of at most the latest five failures to dynamically establish a VXLAN tunnel: This command logs and displays troubleshooting details, including the latest five failure reasons for dynamic tunnel setup (e.g., BGP EVPN issues or reachability problems). This is a standard feature on Huawei CE switches. TRUE.

D . Run the display vxlan troubleshooting command to check at most the latest five reasons why a VXLAN tunnel goes Down: This command also tracks reasons for tunnel Down events (e.g., underlay failure, peer unreachability), limited to the latest five incidents. This is consistent with Huawei's troubleshooting capabilities. TRUE.

All options A, B, C, and D are true, as they represent valid commands and approaches to troubleshoot VXLAN tunnel issues on Huawei CE switches.