MultipleChoice
Refer to the exhibit.
You are designing a new Nimble AF40 for your customer. The array will be added into an existing Nimble HF60 environment connected with SN6000B switches. You have created the configuration shown in the exhibit and noticed an error
What should you change in your configuration to ensure it meets the customer requirements?
OptionsMultipleChoice
A customer is planning to deploy a branch office server rack. The environment will have the following requirements:
* Single rack with 20 HPE ProLiant DL360 Gen10 Servers.
* Each Server will have 6 x 10G SFP+ Ports.
* Each Server will have a dedicated iLO port.
* The customer requires that only two switches be used.
* The customer requires separate control planes.
Which switch configuration can meet these requirements?
OptionsDragDrop
A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
* 3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity
* 10TB of high performance shared storage
* Cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the
left to their appropriate location in the environment on the right.
MultipleChoice
Refer to the exhibit.
An administrator connected a hypervisor to interface Ten-GigabitEthernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. VLAN 10 is configured to be tagged, and VLAN 20 is configured to be untagged on the hypervisor.
The administrator found that all the virtual machines in VLAN 20 can communicate with each other, but not with any virtual machines on VLAN 20 external to the hypervisor.
Given the output in the exhibit, what should you do to resolve the issue?
OptionsMultipleChoice
A customer has a new virtual environment. They selected HPE servers for the environment in order to achieve better performance for their applications.
Which HPE feature enables the customer to achieve this server performance improvement?
OptionsMultipleChoice
A customer has the following requirements:
* two or more 10Gb SFP+ uplinks
* downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables.
* 24 downlink ports
Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?
OptionsDragDrop
Match the industry trend with its use case.
Efficiently user server, storage, and networking resources -- Virtualization
Externalize the infrastructure and eliminate data center capital expenditures -- Cloud computing
Share a common resource or execute a common application across multiple servers for high availability and/or load balancing -- Clustering
Deploy workloads at cloud-like speed on an HPE factory-integrated infrastructure -- Converged system
DragDrop
Place the components on the left in the correct order on the right for the recommended power-up sequence.
SAN switches
Tape libraries
Disk storage
Host servers
DragDrop
Match the HPE Tool with its use case. Select all that apply.
One Config Advanced (OCA) - Estimate the power and cooling requirements and weight for a rack of equipment
Single Point of Connectivity Knowledge (SPOCK) - Check compatibility of storage components
Products and solutions Now (PSNow) - Download a technical presentation for a DL380 Gen10
DragDrop
Match each workload profile description with the corresponding profile. (Select all that apply.)
Missing Critical - Large number of database operations (Trades Performance reliability)
Transactional Application Processing - Trades performance for reliability (Large number of DB Operation)
General Peak Frequency Compute - Maximize processor speed