Free Preparation Discussions
MENU
Dell EMC Exam D-PST-MN-A-24 Topic 4 Question 6 Discussion
Topic #: 4
While on-site installing a Dell EMC PowerStore system, the node A and B embedded module fault LEDs are alternating blue and amber (blue for 3 seconds). What does this
indicate?
The initialization process is a critical step during the installation of a PowerStore system. It involves setting up the system's configuration, including network settings, storage pools, and other essential parameters. Until this process is completed, the system cannot perform storage operations or host any virtual machines.
To resolve this and initialize the system, the following steps should be taken:
Connect to the system through the PowerStore Manager using a supported web browser.
Complete the Initial Configuration Wizard (ICW), which guides you through the necessary steps to initialize the system.
Once the ICW is completed, the system will finalize its configuration and the LEDs should reflect a normal operational state.
Buck
11 months agoLoreta
11 months agoGregg
11 months agoCaren
11 months agoArlyne
10 months agoGenevieve
10 months agoAudria
10 months agoLouvenia
10 months agoLisbeth
10 months agoColette
11 months agoRemona
11 months agoChun
11 months agoStephanie
11 months agoMelissia
11 months agoLinn
12 months agoDexter
11 months agoFreeman
11 months agoChauncey
11 months agoScot
11 months agoBenedict
12 months ago