Free Preparation Discussions
MENU
CWNP CWDP-303 Exam Questions
- Topic 1: Define appropriate requirements areas using software features/ Collect, define, and use technical requirements
- Topic 2: Controller-based (physical and virtual controllers)/ Business use cases and justification
- Topic 3: Existing network services including DNS, DHCP, NTP and authentication servers/ Select qualified implementation technicians when required Define WLAN architectures and select the appropriate architecture for a design/ Discover applications and their specific requirements
- Topic 4: Ensure proper understanding and implementation of design documentation/ Discover WLAN upgrade requirements when applicable
- Topic 5: Define bridge link requirements when applicable/ Perform client measurements and analysis to determine client capabilities
- Topic 6: Ensure proper end-to-end QoS is understood and implemented including WMM, wired QoS, QoS markings and queues/ Signal strength requirements
- Topic 7: Select among common vendor features and make configuration recommendations in a design scenario/ Collect and use business requirements
- Topic 8: Applications and their requirements/ Define Specifications for the WLAN
- Topic 9: Switch capabilities and capacity/ Location services such as RTLS/ Distributed (cloud-based and local WNMS)
- Topic 10: Design special WLAN deployments, including branch and remote offices, mesh networks, and bridge links/ PoE capabilities and power budget
- Topic 11: Use WLAN design software including the common features found in the solutions provided by various vendors
Free CWNP CWDP-303 Exam Actual Questions
Note: Premium Questions for CWDP-303 were last updated On Jul. 12, 2024 (see below)
After deploying a 5 GHz-only WLAN infrastructure in the USA, using 20 MHz channel-widths and all 25 available channels, one of the managers of the company brings his 802.11n tablet to the office to test the Guest SSID. While testing, there were several spots where we would get poor RSSI (below -80dBM) or none at all. You checked the WLAN infrastructure and all APs are up and running and you've validated coverage after deployment. What is causing this issue?
While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel assignment algorithm of the WLAN infrastructure. What should you do to prevent this?
When doing some frame capturing over the air during a voice call, you realized that frames on the downlink (from the AP to the client) direction are not being transmitted with the correct UP value for voice frames, but on the uplink (from the client to the AP) direction are being transmitted correctly. What's the cause of this issue?
Who should be in the final meeting from the customer-side after successfully implementing a WLAN infrastructure?
During a validation site survey, you realize that the installers mounted some of the APs above the ceiling. They said that this was a request from the building architect due to aesthetics constraints. During the requirements gathering, you weren't advised about any aesthetics constraints from the main stakeholder of the project. What should you do in this case?
- Select Question Types you want
- Set your Desired Pass Percentage
- Allocate Time (Hours : Minutes)
- Create Multiple Practice tests with Limited Questions
- Customer Support
Leota
18 days agoElvera
22 days ago