Free Preparation Discussions
MENU
Cisco 300-135 Exam
- Topic 1: Network Principles/ Use Cisco IOS Troubleshooting Tools/ Apply Troubleshooting Methodologies
- Topic 2: Diagnose the Root Cause of Networking Issues (Analyze Symptoms, Identify and Describe Root Cause)
- Topic 3: Layer 2 Technologies/ Troubleshoot Switch Administration/ Troubleshoot Layer 2 Protocols
- Topic 4: Troubleshoot VLANs, Trunking (VTPv1, VTPv2, VTPv3, VTP pruning), EtherChannels, Spanning Tree, Other LAN Switching Technologies
- Topic 5: Layer 3 Technologies/ Troubleshoot IPv4, IPv6 Addressing and Subnetting
- Topic 6: Troubleshoot Static Routing, Default Routing, Passive Interfaces, VRF Lite, Filtering with any Protocol
- Topic 7: Troubleshoot Between any Routing Protocols or Routing Sources/ Manual and Autosummarization with any Routing Protocol
- Topic 8: Troubleshoot EIGRP Neighbor Relationship and Authentication, EIGRP Stubs, EIGRP Load Balancing, EIGRP Metrics, EIGRP for IPv6
- Topic 9: VPN Technologies/ Troubleshoot GRE
- Topic 10: Infrastructure Security/ Troubleshoot IOS AAA Using Local Database, Device Access Control
- Topic 11: Troubleshoot Router Security Features/ IPv4 Access Control Lists (Standard, Extended, Time-Based)/ IPv6 Traffic Filter
- Topic 12: Infrastructure Services/ Troubleshoot Device Management, SNMP, Logging, Network Time Protocol(NTP), IPv4 and IPv6 DHCP
Free Cisco 300-135 Exam Actual Questions
The questions for 300-135 were last updated On 12-04-2020
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened DSW1 will not become the active router for HSRP group 10.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?
On DSW1, related to HSRP, under VLAN 10 change the given track 1 command to instead use the track 10 command.
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolate the cause of this fault and answer the following question.
On which device is the fault condition located?
On R4 the DHCP IP address is not allowed for network 10.2.1.0/24 which clearly shows the problem lies on R4 & the problem is with DHCP
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolate the cause of this fault and answer the following question.
The fault condition is related to which technology?
On R4 the DHCP IP address is not allowed for network 10.2.1.0/24 which clearly shows the problem lies on R4 & the problem is with DHCP
The implementations group has been using the test bed to do a 'proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolate the cause of this fault and answer the following question.
What is the solution to the fault condition?
On R4 the DHCP IP address is not allowed for network 10.2.1.0/24 which clearly shows the problem lies on R4 & the problem is with DHCP
The implementation group has been using the test bed to do an IPv6 'proof-of-concept1. After several changes to the network addressing and routing schemes, a trouble ticket has been opened indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2 (2026::102:1).
Use the supported commands to isolate the cause of this fault and answer the following question.
The fault condition is related to which technology?
Since we are unable to ping the IPv6 address, the problem is with IPv6 OSPF Routing.
- Select Question Types you want
- Set your Desired Pass Percentage
- Allocate Time (Hours : Minutes)
- Create Multiple Practice tests with Limited Questions
- Customer Support
Currently there are no comments in this discussion, be the first to comment!