Discuss Cisco 300-615 Exam Topic 3 Question 110

A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?

A1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status
4) Reseat the affected IOM.

B1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status
4) Reseat the affected IOM.

C1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status.
4) Reseat the affected IOM.

D1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status.
4) Reseat the affected IOM.

Suggested Answer: B

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooting_chapter_01001.html

Get Premium 300-615 Questions as Interactive Web-Based Practice Test or PDF Real Exam Format Detailed Explanations Instant Access Get Your Practice Test

34 comments · newest first

Meghan 10 months ago

I’m surprised they’d suggest different software levels in A. That’s risky!

Florinda 10 months ago

Totally agree with B! One cable is enough if everything else checks out.

Odette 11 months ago

Nah, I believe C is the way to go. Two cables are better!

Aliza 11 months ago

Wait, are we sure about the firmware levels? That seems off.

Lizbeth 11 months ago

I think option B is correct. Same software levels are key.

Emerson 11 months ago

I’m confused about the firmware levels. I thought they had to be the same, but I also remember something about checking the cables. Could it be B or D?

Richelle 11 months ago

I feel like I read that having at least two cables is important for redundancy, so maybe C is the answer?

Tiffiny 12 months ago

I’m not entirely sure, but I think we practiced a question where we had to check the physical connections first. That makes me lean towards A or C.

Annelle 12 months ago

I remember something about the IOM firmware needing to match the UCS Manager version, so I think B or C might be right.

Laquanda 1 year ago

This question is testing our knowledge of Cisco UCS troubleshooting. I'll need to stay focused and methodical in my approach, verifying each component as the steps outline. Taking it one step at a time will be important.

Margarett 1 year ago

Okay, I think I've got this. The key is to make sure the IOM firmware and UCS Manager are at the same level, then check the physical connections and link status. Reseating the IOM is the final step. I feel confident I can work through this step-by-step.

Jacqueline 1 year ago

Hmm, I'm a bit unsure about this one. There are a few different steps to consider, and I want to make sure I get them in the right order. Let me re-read the question carefully.

Santos 1 year ago

This seems like a pretty straightforward troubleshooting question. I'll start by verifying the IOM firmware and Cisco UCS Manager software levels, then check the physical cables and link status.

Brett 1 year ago

Haha, this question is a real 'chassis' to solve! But seriously, I think C is the way to go. Gotta make sure those cables are in tip-top shape.

Quinn 1 year ago

↳ replying to Brett

Charolette: Definitely, covering all those steps should help resolve the chassis management controller issue.

Azalee 1 year ago

↳ replying to Brett

User 3: I think C is the way to go as well. Reseating the affected IOM might just do the trick.

Charolette 1 year ago

↳ replying to Brett

User 2: Yeah, making sure the firmware levels match is important too. Can't overlook that step.

Dulce 1 year ago

↳ replying to Brett

User 1: I agree, C seems like the best option. Checking those cables is crucial.

In 1 year ago

I agree with Bettye, A seems like the right choice based on the steps provided.

Bettye 1 year ago

But A makes sense because it mentions verifying different software levels.

Lottie 1 year ago

I disagree, I believe the correct answer is C.

Isabelle 1 year ago

Hmm, I'm not sure. Option B says you only need one cable, but option C says you need two. I'm leaning towards C, but it's a tough call.

Jerrod 1 year ago

↳ replying to Isabelle

User 3: I'm with you guys, let's go with option C.

Edelmira 1 year ago

↳ replying to Isabelle

User 2: Yeah, I agree. Having two cables seems more reliable.

Laurel 1 year ago

↳ replying to Isabelle

User 1: I think option C is the way to go. It covers all the bases.

Bettye 1 year ago

I think the answer is A.

Gail 1 year ago

Option A looks pretty good to me. Checking the firmware and cables as well as reseating the IOM seems like a thorough troubleshooting process.

Isaac 1 year ago

↳ replying to Gail

User 3: I agree, checking all those steps should help resolve the problem.

Truman 1 year ago

↳ replying to Gail

User 2: Yeah, reseating the IOM could fix the issue. It's a good troubleshooting process.

Margot 1 year ago

↳ replying to Gail

User 1: I think option A is the way to go. Checking firmware and cables is important.

Rolande 1 year ago

I think option C is the correct answer. Matching software levels and verifying multiple cables seems like the best approach.

Tyisha 1 year ago

↳ replying to Rolande

Let's go with option C and see if that resolves the issue.

Wilson 1 year ago

↳ replying to Rolande

I think checking multiple cables is crucial in this situation.

Sherell 1 year ago

↳ replying to Rolande

I agree, option C seems like the most logical choice.

Cisco 300-615 Exam - Topic 3 Question 110 Discussion