Free SAP C_S43 Exam Dumps September 2026

Task 11 Overview

This task involves classifying a piece of equipment so it can be used in the Checklist process. By assigning a specific class and characteristic values, you enable the system to automatically find the correct inspection plan when a maintenance order is created.

Step 1: Access the Equipment Master Record

To classify the equipment, you must first open its master record in 'Change' mode.

Transaction Code: Enter IE02 (Change Equipment) in the command field and press Enter.

Equipment: Enter T-PA48.

Action: Press Enter to open the record.

Step 2: Assign the Class to the Equipment

Now you will link the equipment to a class that contains the required technical characteristics.

Navigate: Click the Classification button in the top toolbar (or go to the Classes tab if available).

Class Assignment:

Class Type: Ensure this is set to 002 (Equipment Class).

Class: Enter EQ11.

Action: Press Enter. The system will now display the characteristics associated with class EQ11 in the bottom half of the screen.

Step 3: Assign Characteristic Values

This is the critical step that tells the system exactly which inspection plan to use for this specific pump.

Locate the Characteristic: In the values table, look for a characteristic related to 'Inspection Plan' or 'Checklist Group.'

Enter the Value: Assign the value so that Inspection Plan CL-DE-00 / 1 is automatically found.

Note: Typically, you will enter CL-DE-00 in the 'Inspection Plan Group' field and 1 in the 'Group Counter' field.

Action: Press Enter to validate the values.

Step 4: Save

Action: Click the Save (floppy disk) icon.

Confirmation: The system should display a message at the bottom saying: 'Equipment T-PA48 changed.'