Free Juniper JN0-105 Exam Dumps May 2026

In Juniper firewall filter configurations, 'discard' and 'accept' are two valid terminating actions for a term within a filter. The 'discard' action drops the packet, preventing it from reaching its intended destination, while the 'accept' action allows the packet to pass through the filter, proceeding to its next hop or destination. 'Count' is a non-terminating action that increments a counter every time a packet matches the term but does not inherently determine the packet's fate. 'Next term' directs the evaluation to proceed to the next term in the filter for further processing, also a non-terminating action.

The routing table and forwarding table play distinct roles in a Junos OS device. The correct answers are A and D. The routing table (A) is used by the Routing Engine (RE) to select the best route among all the learned routes, while the routing table (D) stores all routes and prefixes learned from all routing protocols. The forwarding table, in contrast, contains only the active routes chosen by the RE and is used by the Packet Forwarding Engine for actual packet forwarding.

When configuring the system-related settings for the current date and time on a Junos device, especially for a specific time zone like America/Los_Angeles, and the time does not automatically adjust, two effective actions can be taken. Firstly, setting the date and time manually allows for immediate correction of the system clock. This can be done via the CLI with the appropriate set date and time command. Secondly, configuring the device to use an NTP server can provide ongoing synchronization with an accurate time source, ensuring that the device maintains the correct time and date automatically in the future, even in the case of restarts or minor drifts in the internal clock.