Free Huawei H12-211 Exam Dumps

MultipleChoice

As shown in the figure, the network administrator needs to configure static NAT on the RTA so that host A in the private network can communicate with the public network host C.

Letter, then the following about the configuration of static NAT, the correct is ()

MultipleChoice

When the data encapsulation mode of IPSec is tunnel mode, the IP address of the intranet host is hidden. The reason for this is to protect the entire original packet.

Safety

MultipleChoice

system - view

[Huawei]command - privilege level 3 view user save

The correct statement about the above configuration command is ()

MultipleChoice

SNMP packets are carried over TCP.

MultipleChoice

NAT can be implemented in a variety of ways, suitable for different scenarios. For example, dynamic NAT can translate the server address inside the private network into a public IP address.

Provide services to the public network.

MultipleChoice

With reference to the following topology and configuration, two routers are connected through a serial cable. If no Layer 2 protocol is specified, PPP is used by default.

Protocol interconnection

MultipleChoice

AAA is an abbreviation for Authentication, Authorization, and Accouting.

MultipleChoice

The function of InARP is the opposite of that of ARP. The main purpose is to reversely resolve the known target MAC address to the protocol address of the peer device on the Ethernet.

Including IP address and IPX address.

MultipleChoice

The biggest advantage of NAPT is its flexibility, that is, it can be used as a source address translation, as well as a destination address translation, and can also be used as a protocol port.

Conversion.

MultipleChoice

Refer to the following topology and router configuration. The NAT configuration does not specify a NAT global address pool, so address translation cannot be performed correctly.