Hitachi Vantara HQT-4420 Exam - Topic 3 Question 19 Discussion

Actual exam question for Hitachi Vantara's HQT-4420 exam

Question #: 19
Topic #: 3

Your customer has tested a new HCP G10 with an S10 node and they now want to re-install the S10 node before turning it into production.

What are three requirements? (Choose three.)

AThe S10 node must be retired in the HCP G10 System Management Console

BThe S10 node must be disconnected from the HCP G10 cluster

CThe S10 node must boot the installation package from the USB drive

DThe Genesis build must be manually started on the S10 node

EThe first-time setup wizard must be completed on the S10 node

Show Suggested Answer

Suggested Answer: A, C

For the HCP G10 SSD option:

Two SSD disks are installed at the rear of the server (A): This is correct. The SSDs in the HCP G10 server are typically installed at the rear of the server to provide fast access to critical system data, such as metadata and indexes.

Software RAID1 is used to mirror the disks (C): This statement is also correct. Software RAID1 provides mirroring of the SSD disks, ensuring redundancy and data protection in case of a disk failure. RAID1 is chosen for its simplicity and reliability in providing redundancy without requiring additional hardware. Details can be found in the 'HCP G10 Hardware Configuration and Maintenance Guide.'

by Jesus at Mar 21, 2025, 02:57 PM

Limited Time Offer

25%

Off

Get Premium HQT-4420 Questions as Interactive Web-Based Practice Test or PDF

Contribute your Thoughts:

Submit Cancel

Barrett

4 months ago

Yeah, the setup wizard is crucial for first-time installs.

upvoted 0 times

...

Kallie

4 months ago

Wait, do we really need to boot from USB? Seems odd.

upvoted 0 times

...

Avery

4 months ago

The S10 node definitely needs to be disconnected first.

upvoted 0 times

...

Mayra

4 months ago

Retiring the node in the console is also essential!

upvoted 0 times

...

Eladia

4 months ago

I agree, disconnecting is a must!

upvoted 0 times

...

Troy

5 months ago

I practiced a similar question, and I think retiring the S10 node in the System Management Console is crucial before any reinstallation.

upvoted 0 times

...

Nieves

5 months ago

I feel like the first-time setup wizard is essential after reinstalling, but I can't remember if we need to manually start the Genesis build too.

upvoted 0 times

...

Denise

5 months ago

I remember something about the installation package needing to be booted from a USB drive, but I can't recall if that's a must-have or just a common step.

upvoted 0 times

...

Whitney

5 months ago

I think the S10 node definitely needs to be disconnected from the HCP G10 cluster before reinstalling, but I'm not sure about the other requirements.

upvoted 0 times

...

Chaya

5 months ago

This seems pretty straightforward. I'd say the three requirements are to retire the S10 node, disconnect it from the cluster, and boot the installation package from the USB drive. Shouldn't be too hard to figure out.

upvoted 0 times

...

Marti

6 months ago

I'm a bit confused about the "Genesis build" requirement. Do I need to manually start that on the S10 node? I'll have to double-check the documentation on that one.

upvoted 0 times

...

Melissia

6 months ago

Piece of cake! I've done this kind of thing before. The S10 node needs to be retired, disconnected, and then booted from the installation USB. Easy peasy.

upvoted 0 times

...

Ena

6 months ago

Okay, let's see here. I think the key is to disconnect the S10 node from the HCP G10 cluster before re-installing it. The other requirements seem pretty straightforward.

upvoted 0 times

...

Erasmo

6 months ago

Hmm, this looks like a tricky one. I'll need to carefully read through the options and think about the steps required to re-install the S10 node.

upvoted 0 times

...

Lorrine

11 months ago

B, C, and E are the correct options. This is a piece of cake compared to the last exam question about quantum entanglement and blockchain.

upvoted 0 times

Kenda

10 months ago

Don't forget to complete the first-time setup wizard on the S10 node.

upvoted 0 times

...

Felicitas

10 months ago

Make sure to disconnect the S10 node from the HCP G10 cluster.

upvoted 0 times

...

Lamar

10 months ago

B, C, and E are the correct options.

upvoted 0 times

...

Ines

11 months ago

Don't forget to complete the first-time setup wizard on the S10 node.

upvoted 0 times

...

Xuan

11 months ago

Make sure to disconnect the S10 node from the HCP G10 cluster.

upvoted 0 times

...

Delisa

11 months ago

B, C, and E are the correct options.

upvoted 0 times

...

Cary

11 months ago

Wait, I thought the S10 node was supposed to make me a sandwich, not get reinstalled. Where's my lunch?

upvoted 0 times

...

Anika

12 months ago

Hmm, I'm pretty sure the S10 node needs to be sacrificed to the HCP G10 system gods before any reinstallation can happen.

upvoted 0 times

Mozelle

10 months ago

C) The S10 node must boot the installation package from the USB drive

upvoted 0 times

...

Mari

11 months ago

B) The S10 node must be disconnected from the HCP G10 cluster

upvoted 0 times

...

Ivette

11 months ago

A) The S10 node must be retired in the HCP G10 System Management Console

upvoted 0 times

...

Jamie

12 months ago

I thought the S10 node was supposed to be a top-secret government project. Why are we discussing it so openly?

upvoted 0 times

...

Levi

12 months ago

Right, and the first-time setup wizard must be completed on the S10 node as well.

upvoted 0 times

...

Lajuana

1 year ago

B, C, and E are the requirements. Easy peasy lemon squeezy!

upvoted 0 times

Mignon

10 months ago

User 4: Complete the first-time setup wizard on the S10 node.

upvoted 0 times

...

Michal

10 months ago

User 3: Boot the installation package from the USB drive.

upvoted 0 times

...

Renay

10 months ago

User 2: Disconnect the S10 node from the cluster.

upvoted 0 times

...

Denny

10 months ago

User 1: Make sure to retire the S10 node in the System Management Console.

upvoted 0 times

...

Mari

11 months ago

Linn: Got it, so we need to follow steps B, C, and E. Easy peasy lemon squeezy!

upvoted 0 times

...

Allene

11 months ago

User 3: The S10 node must boot the installation package from the USB drive and complete the first-time setup wizard.

upvoted 0 times

...

Linn

11 months ago

User 2: Yes, that's one of the requirements. What else do we need to do?

upvoted 0 times

...

Alyssa

11 months ago

User 1: Make sure to disconnect the S10 node from the HCP G10 cluster.

upvoted 0 times

...

Dominic

1 year ago

Yes, that's one of the requirements. I also believe the S10 node must boot the installation package from the USB drive.

upvoted 0 times

...

Levi

1 year ago

I think the S10 node must be disconnected from the HCP G10 cluster.

upvoted 0 times

...