MENU
Which commands are required to properly configure an OS10 switch to run OSPF on eth1/1/3 and to add network 144.254.1.0/30 to OSPF area 0?
Suggested Answer: C
Get Premium D-NWG-FN-23 Questions
as Interactive Web-Based Practice Test or PDF
Real Exam Format
Detailed Explanations
Instant Access
Get Your Practice Test
25 comments · newest first
DI
Diane
10 months ago
Not sure about D, that router ospf command seems out of place.
RO
Rosendo
11 months ago
Wait, is the router-id really necessary for OSPF to work?
LA
Laurel
11 months ago
Definitely going with C, it has all the right steps!
GE
Gerardo
11 months ago
I think B is missing the ip address command.
PE
Peter
11 months ago
Option C looks solid for OSPF setup.
DU
Dusti
12 months ago
I thought the command for adding the network to OSPF was supposed to be in the router OSPF section, so I'm not sure about the options that have it in the interface config.
FL
Fletcher
12 months ago
I'm leaning towards option A, but I have a nagging feeling that the area notation might be off.
TR
Truman
12 months ago
I remember practicing a question like this, and I feel like option C is close, but I can't recall if the router ID needs to be set first.
DO
Dolores
1 year ago
I think the router OSPF command should come after configuring the interface, but I'm not entirely sure about the order.
FR
France
1 year ago
Okay, I think I've got this. The key is to first create the OSPF process, then enable it on the interface. The IP address and no switchport commands also need to be in there. I'm feeling pretty confident I can tackle this one.
ER
Ernie
1 year ago
Hmm, I'm a bit unsure about the order of the commands here. Do I need to create the OSPF process first before enabling it on the interface? I'll have to double-check the syntax to make sure I get this right.
ME
Melissa
1 year ago
This looks like a pretty straightforward OSPF configuration question. I'd start by configuring the interface with the no shutdown, no switchport, and IP address commands. Then I'd enable OSPF on the interface and configure the OSPF process.
SH
Sharan
1 year ago
Wait, do I need to configure the router-id as well? I remember that being important for OSPF. I better review the OSPF configuration steps to make sure I don't miss anything critical.
CO
Cordie
1 year ago
Wait, I'm confused. Isn't storage capacity a pretty important factor when setting a retention schedule? I'm not sure about this one.
IR
Iraida
1 year ago
This question seems pretty straightforward. I'm pretty confident I can identify the two correct statements about subvolumes in BtrFS.
BU
Burma
1 year ago
I think the command to kill all processes should be something like "kill -9" but I'm not sure about the right argument after that.
BU
Burma
1 year ago
I'm a bit unsure on this one. TFTP is a simple file transfer protocol, but I'm not sure if it's specifically used for IOS image transfers. Maybe I should review my notes on TFTP before answering.
WA
Wava
2 years ago
I beliWava option A is preferred because it explicitly starts with configuring the interface and then moves on to OSPF configurations in a more organized manner. This could potentially reduce errors during setup.
LI
Lindsay
2 years ago
I am not sure about the difference between A and D. Can someone explain why A might be better than D, or vice versa?
KA
Kathrine
2 years ago
I think Felix might be onto something. Option D seems to cover all the necessary configuration steps for OSPF on eth1/1/3 with the correct network added to area 0.
FE
Felix
2 years ago
I disagree with you, Joesph. I think option D) OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# no switchport OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0 OS10(conf-if-eth1/1/3)# router ospf 1 is the correct set of commands.
JO
Joesph
2 years ago
I think the correct commands are A) OS10(config)# interface ethernet 1/1/3 OS10(conf-if-eth1/1/3)# no shutdown OS10(conf-if-eth1/1/3)# no switchport OS10(conf-if-eth1/1/3)# ip address 144.254.1.2/30 OS10(conf-if-eth1/1/3)# ip ospf 1 area 0.0.0.0 OS10(config)# router ospf1
CA
Carman
2 years ago
I see your point, Lazaro, but I think answer C is the most straightforward and includes all necessary commands for OSPF configuration.
LA
Lazaro
2 years ago
I disagree, I believe answer D is better as it includes configuring the interface and the OSPF router in one command.
TE
Terrilyn
2 years ago
I think answer A is correct because it properly configures the interface for OSPF.